Change DST-2 frequency with firmware

• Related Articles

• Changing/Upgrading Firmware with the NGW-1

  NGW-1 firmware v2.500 and newer Switching between AIS and Standard configurations does not require the firmware to be updated, as Actisense Toolkit can help create the exact configuration by enabling or disabling conversions as required. NGW-1 ...

• DST-2 Compatibility

  To be compatible with the DST-2, your transducer must be piezoelectric depth transducer crystal element using a three wire interface.

• DST-2 Max/Min Ranges

  The typical maximum depth range of the DST-2 is 100 metres. The minimum detectable depth of the DST-2 is typically 0.5 metres – which makes it one of the best in the world. The true minimum depth that is detectable depends far more on the depth ...

• How to Upgrade/Downgrade EMU-1 Firmware

  Changing the firmware on an Actisense EMU-1 is a straight forward process, which only requires a PC to run the freely downloadable Actisense Toolkit, and an Actisense NGT-1 to communicate between the NMEA 2000 bus and the PC. For a step by step guide ...

• DST-2 CAN-H / CAN-L Connections

  The CAN connections on the DST-2 were designed for an OEM customer that only required a basic CAN connection.  As the DST-2 CAN connections do not meet the strict requirements of NMEA 2000, it is not possible to certify or market the DST-2 as an NMEA ...