If your NMEA 0183 Listener is not showing any data when connected to the NMEA 0183 output of an NGW-1, the first step for fault finding should be to see if the NGW-1 supports the conversions you need. For more information on the steps taken when ...
For a detailed explanation of using Toolkit to configure the NGW-1, please visit the following Article: https://www.actisense.com/knowledge-base/nmea-2000/ngw-1/configuring-the-ngw-1-using-toolkit/
When there is more than one device of the same type (like a GPS) on the NMEA 2000 network, the NGW-1 will use the data from the highest priority (lowest source address). If the device you'd rather use as a secondary Talker for the NGW-1 claims a ...
Unfortunately it is not possible in any NMEA 0183 networking situation to connect the output of more than one Talker to the input of one or more Listener/s. To convert data from more than one NMEA 0183 Talker to NMEA 2000 you have two choices which ...
The conversion of Engine Data PGNs to NMEA 0183 sentences is very limited. Visit this article for more info: https://www.actisense.com/knowledge-base/hottest-articles/converting-engine-data-from-nmea-2000-to-nmea-0183/