Converting Engine Data from NMEA 2000 to NMEA 0183

• Related Articles

• Converting Multiple NMEA 0183 Talkers to NMEA 2000

  Unfortunately it is not possible in any NMEA 0183 networking situation to connect the output of more than one Talker to the input of one or more Listener/s.  To convert data from more than one NMEA 0183 Talker to NMEA 2000 you have two choices which ...

• NMEA 0183 device not receiving data from NGW-1

  If your NMEA 0183 Listener is not showing any data when connected to the NMEA 0183 output of an NGW-1, the first step for fault finding should be to see if the NGW-1 supports the conversions you need. For more information on the steps taken when ...

• NMEA 2000 Depth, Speed & Temperature Data from a DST-2

  To get NMEA 2000 data from your legacy depth, speed or temperature instruments you may wish to use a DST-2 connected to the input of an NGW-1. Here's how to connect the two together:

• Using the NGW-1 with Waypoints

  If you want to use the NGW-1 with NMEA 0183 waypoint names, they have to be purely numeric – for more information on using the NGW-1 with waypoints, please visit the following article: ...

• Choosing the Right NGW-1

  "Why do I need an NGW-1?" Due to the incompatibilities between NMEA 0183 and NMEA 2000, an Actisense NGW-1 is needed to bi-directionally convert data between the two standards. For further information on the NGW-1 and the variants, please visit the ...