How to Record NMEA 2000 Data

How to Record NMEA 2000 Data

If you're experiencing issues with an NMEA 2000 network, it can be useful to take a recording of all the data on the network for analysis.  You can do that using our free NMEA Reader software.

For an explanation of the steps taken to record NMEA 2000 data, use the following article: https://www.actisense.com/knowledge-base/nmea-2000/ngt-1/how-to-record-nmea-2000-data/

    • Related Articles

    • NMEA 0183 device not receiving data from NGW-1

      If your NMEA 0183 Listener is not showing any data when connected to the NMEA 0183 output of an NGW-1, the first step for fault finding should be to see if the NGW-1 supports the conversions you need. For more information on the steps taken when ...

    • Converting Engine Data from NMEA 2000 to NMEA 0183

      The conversion of Engine Data PGNs to NMEA 0183 sentences is very limited. Visit this article for more info: https://www.actisense.com/knowledge-base/hottest-articles/converting-engine-data-from-nmea-2000-to-nmea-0183/

    • Sharing NMEA 0183 Data with a PC

       Connecting NMEA 0183 devices directly to a PC without isolation is not recommended as this can cause ground loops which will damage your PC and your NMEA 0183 devices.  For examples of different connection methods, refer to the following article: ...

    • Converting Multiple NMEA 0183 Talkers to NMEA 2000

      Unfortunately it is not possible in any NMEA 0183 networking situation to connect the output of more than one Talker to the input of one or more Listener/s.  To convert data from more than one NMEA 0183 Talker to NMEA 2000 you have two choices which ...

    • Filtering Data Using the NDC-4

      NDC Control Centre can be used to turn on and off data filtering via the 'Inclusion List' tab. For details on how this process works, visit the following article: ...