NGT-1 Third-Party Software Compatibility
The Software Development Kit (SDK) that developers use to make the NGT-1 compatible with their software has been issued to over 200 developers. This makes keeping an accurate and up to date compatibility list a very difficult task. Therefore, we recommend that you contact your software developer directly to ask them if they support the NGT-1.
To the best of our knowledge, the following third-party software applications support the NGT-1 with firmware version 2.210 installed.
Related Articles
EMU-1 Engine Compatibility and Setup
In order to confirm that the EMU-1 will be compatible with your system, please identify the manufacturer of the gauges (VDO, Faria, US Marine, Yanmar etc...) and the range of values (40 to 140 degrees C, 0 to 5 Bar etc...). Once confirmed, refer to ...
Configuring the NGT-1
The Application that is being used with the NGT-1 is responsible for configuring the NGT-1 for each session when it opens up the COM port to the NGT-1. For example, NMEA Reader by default will set the NGT-1 to 'Receive:All'. This means that the NGT-1 ...
DST-2 Compatibility
To be compatible with the DST-2, your transducer must be piezoelectric depth transducer crystal element using a three wire interface.
Using/Viewing NMEA 2000 Data on a PC
To view the NMEA 2000 data on your network you will require an Actisense NGT-1 and our freely available NMEA Reader software. Together, these become great NMEA 2000 diagnostic tools. As your NMEA 2000/SeaTalkNG network grows, being able to see what ...
Difference Between NGT-1 and NGW-1
The NGT-1 and NGW-1 are both powerful devices with very different operations. It is not possible to change an NGT-1 to an NGW-1 and vice versa. For more information on the differences between the two devices, visit the following article: ...