Saving and reusing an Actisense NDC-4 Configuration

Saving an NDC-4 Configuration

Sometimes a user may need to save the configuration of an NDC-4 to a file.  This configuration file can be loaded back in to NDC Control Centre.  There are a couple of reasons why this may be useful:
  • It's a common configuration that you wish to re-use multiple times.  Saving the configuration to file will save you time in future.
  • Our tech support engineers may ask for it.  This provides an easy way for us to see how your NDC-4 has been set up if you are experiencing some issues.
Before you begin you will need to connect your NDC-4 to a PC or laptop.  This article provides full details for how to do that.

You will also need NDC Control Centre installed on the same PC.  Download it here.

For instructions on how to save and also re-load a configuration, please visit the following article: https://www.actisense.com/knowledge-base/nmea-0183/ndc-4/saving-an-ndc-4-configuration/

    • Related Articles

    • Configuring the NDC-4 for AIS

      We offer the NDC-4 preconfigured for AIS devices (product code: NDC-4-AIS).  This will have "OPTO IN 2" set to communicate at 38400 baud by default and filters applied to this input to prevent the data appearing at "ISO OUT 1" as the large volume of ...

    • NDC-4 Inputs not working

      If only a single input on the NDC-4 seems to be receiving data, please check that your NDC-4 is not in autoswitch mode. When in this mode, only data from input 1 will be used. This function is designed for when using more than one source of the same ...

    • How to Connect the NDC-4 to a PC or Laptop

      If you need to configure your NDC-4 using Control Centre, or if you wish to share your combined NMEA 0183 data with third party software, you will need to connect the NDC-4 to a PC or laptop. The instructions for doing this can be found here: ...

    • Filtering Data Using the NDC-4

      NDC Control Centre can be used to turn on and off data filtering via the 'Inclusion List' tab. For details on how this process works, visit the following article: ...

    • What is needed to configure the EMU-1

      The Actisense Toolkit configures the EMU-1 - please see the Toolkit Manual for further details of how to use this software. For further information on the default configuration of the EMU-1, and using an NGT-1 to perform the configuration, please ...