Using the NGW-1 with Waypoints

Using the NGW-1 with Waypoints

If you want to use the NGW-1 with NMEA 0183 waypoint names, they have to be purely numeric – for more information on using the NGW-1 with waypoints, please visit the following article: https://www.actisense.com/knowledge-base/nmea-2000/ngw-1/using-the-ngw-1-with-waypoints/

    • Related Articles

    • Configuring the NGW-1 using Toolkit

      For a detailed explanation of using Toolkit to configure the NGW-1, please visit the following Article: https://www.actisense.com/knowledge-base/nmea-2000/ngw-1/configuring-the-ngw-1-using-toolkit/

    • Choosing the Right NGW-1

      "Why do I need an NGW-1?" Due to the incompatibilities between NMEA 0183 and NMEA 2000, an Actisense NGW-1 is needed to bi-directionally convert data between the two standards. For further information on the NGW-1 and the variants, please visit the ...

    • Changing/Upgrading Firmware with the NGW-1

      NGW-1 firmware v2.500 and newer Switching between AIS and Standard configurations does not require the firmware to be updated, as Actisense Toolkit can help create the exact configuration by enabling or disabling conversions as required. NGW-1 ...

    • NMEA 0183 device not receiving data from NGW-1

      If your NMEA 0183 Listener is not showing any data when connected to the NMEA 0183 output of an NGW-1, the first step for fault finding should be to see if the NGW-1 supports the conversions you need. For more information on the steps taken when ...

    • Connecting multiple NMEA0183 Listeners to NGW-1

      NMEA 0183 Output It is perfectly acceptable to connect up to eight devices to the NGW-1 NMEA 0183 output provided that they are all individually electrically isolated, depending on the electrical demands from each device. However, please check with ...