DST-2
Change DST-2 frequency with firmware
The DST-2 frequency is dictated by the hardware components. Which means it is unfortunately not possible to change it by installing different firmware.
NMEA 2000 Depth, Speed & Temperature Data from a DST-2
To get NMEA 2000 data from your legacy depth, speed or temperature instruments you may wish to use a DST-2 connected to the input of an NGW-1. Here's how to connect the two together:
DST-2 CAN-H / CAN-L Connections
The CAN connections on the DST-2 were designed for an OEM customer that only required a basic CAN connection. As the DST-2 CAN connections do not meet the strict requirements of NMEA 2000, it is not possible to certify or market the DST-2 as an NMEA ...
DST-2 Max/Min Ranges
The typical maximum depth range of the DST-2 is 100 metres. The minimum detectable depth of the DST-2 is typically 0.5 metres – which makes it one of the best in the world. The true minimum depth that is detectable depends far more on the depth ...
DST-2 Compatibility
To be compatible with the DST-2, your transducer must be piezoelectric depth transducer crystal element using a three wire interface.